1. Three (Two ) sections type straightening device, it's no need to adjust straighten function
when rolled materials under straightening process( from start to end), to ensure the material
the same flatness completely.
2. Superior products can not be finished with high accuracy only smoothing out of coil materials
may be accomplished,so material need to be straightened and stress moderately removed.
3. After straghtening, material can be curled upward, downward or flat easily.
4. The rollers bearings are lubricating free type,no need oiling, there is no problem of adherence oil
or dirt.
5. The drive unit is controlled by inverter to feed smoothly at speed synchronized with
the press machine.
6. Straightening upper rollers are available opening type which is easy to mop, clean rollers, repair and
maintain to ensure and enhance product quality.
Model |
SNL (Two Sections ) |
SAL (Three sections ) |
||||
Material Width (mm) |
150 |
200 |
300 |
150 |
200 |
300 |
Material Thickness (mm) |
0.1~0.6 |
0.1~0.6 |
||||
Adjustment Method |
四點獨立式 |
|||||
Speed |
16M/min |
|||||
Motor (hp) |
1/2 |
1 |
1/2 |
1 |
||
Direction |
Left to Right |
|||||
Power |
AC220V、AC380V、AC415V、AC440V |